Thermal Efficiency in Steel Reheating Process
DOI:
https://doi.org/10.36602/ijeit.v3i1.283الكلمات المفتاحية:
heat balance, material balance, reheat furnace, steel reheating, thermal Efficiencyالملخص
In this study, the energy consumption by the
process of steel billet reheating in an industrial steel reheat
furnace at the Libya Iron and Steel Company (LISCO) is
considered. It is known that in the steel industry, one of the
processes requiring the most energy is the process of
reheating the steel prior to hot rolling. A comprehensive
mass and heat balance was performed on the furnace, taking
into account all actual entering and exiting furnace
parameters. Furnace thermal efficiency was found to be low
and heat losses from different areas of the furnace were
considerable.
التنزيلات
المراجع
F. Erfurth, J. Grzych; R. Parron, and F. Miller,"Fuel Savings for
Slab Reheating Furnaces through Oxyfuel Combustion" ,AISTech
Proceedings - Volume II, pp. 1071-75, 2006.
D. Lee, "Evaluation of Optimal Residence Time in a Hot Rolled
Reheating Furnace", World Academy of Science, Engineering and
Technology 59, pp. 1180-83, 2011.
P. Marino, A.Pignotti and D. Dolis, "Numerical Model of Steel Slab
Reheating in Pusher Furnaces", Latin American Applied Research,
-257, pp. 257- 261, 2002.
J. Srisertpol, S. Tantrairatn, P. Tragrunwong and V. Khomphis,
"Estimation of the Mathematical Model of the Reheating Furnace
Walking Hearth Type in Heating Curve Up Process", International
Journal of Mathematical Models and Methods in Applied Science,
Issue 1, Volume 5, pp.167-174, 2011.
B. David and M. Himmelblau, "Basic Principles of Calculations in
Chemical Engineering", 6th
Edt., 1996.
التنزيلات
منشور
إصدار
القسم
الرخصة
الحقوق الفكرية (c) 2016 The International Journal of Engineering & Information Technology (IJEIT)
هذا العمل مرخص بموجب Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
