Performance Analysis of Dual-Arm Printed Monopole Antenna for LTE1800/2600

المؤلفون

  • Asma Alsoussa Department of Electrical and Electronics Engineering, Omer Al-Mukhtar University, Libya.
  • Ghaith Mansour Department of Electrical & Electronic Engineering, Sirte University, Libya
  • Mohammed Elmahdi Department of Electrical & Electronic Engineering, Sirte University, Libya
  • Ekasit Nugoolcharoenlap Department of Telecommunication Engineering, Rajmangala University of Technology Rattanakosin, Thailand.

DOI:

https://doi.org/10.36602/ijeit.v8i2.155

الكلمات المفتاحية:

multiband printed monopole antenna، LTE 1800MHz، LTE 2600MHz، wireless communications

الملخص

Dual-arm printed monopole antenna covering 1.8GHz and 2.6GHz bands for LTE applications is presented. The antenna consists of two parallel monopoles fed by a microstrip line. The ground plane is of length 40 mm and width 50 mm. The 50Ω microstrip feed line and the dual-arm monopole are printed on a dielectric substrate at the opposite side of the ground plane. The dielectric substrate is made of FR4 material which has dielectric constant of ɛr = 4.5 and thickness of 0.8mm. The proposed antenna provides a good return loss, omni-directional radiation patterns, and good directivity. The proposed antenna is simulated using the 3-D electromagnetic solver of CST®.

التنزيلات

تنزيل البيانات ليس متاحًا بعد.

التنزيلات

منشور

2024-02-13

إصدار

مجلد 8 عدد 2 (2022): June 2022

القسم

Electrical Engineering

الرخصة

الحقوق الفكرية (c) 2022 The International Journal of Engineering & Information Technology (IJEIT)

Creative Commons License

هذا العمل مرخص بموجب Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

كيفية الاقتباس

Performance Analysis of Dual-Arm Printed Monopole Antenna for LTE1800/2600. (2024). The International Journal of Engineering & Information Technology (IJEIT), 8(2), 92-95. https://doi.org/10.36602/ijeit.v8i2.155

المؤلفات المشابهة

1-10 من 15

يمكنك أيضاً إبدأ بحثاً متقدماً عن المشابهات لهذا المؤلَّف.