Experimental Study on the Effect of Varying Operating Conditions on Performance of Compressive Cooling System

محتوى المقالة الرئيسي

Ali E. Hegaig
Haithem I. Elderrat
Salem Fathi Elsheltat

الملخص

Air conditioning and cooling systems could be negatively influenced by the external conditions, and it is quite possible that this harmful effect reduces the performance of these systems. This is because these unites requiring the outside temperatures to be lower than the heat being released from them. Unfortunately, this would not work in a favor of saving energy. To avoid low efficiency and to maintain high performance of the cooling system, those devices should be carefully selected based on experimental studies undergoing different local conditions.
This humble article aims to experimentally investigate the effect of changing the external operating conditions on the performance of a compressive cooling system. The test facility was designed and arranged to simulate the external operating conditions. The outside conditions surrounding the condenser (such as speed of air movement, external air temperature) were varied, and accordingly the pressures and temperatures of specific points in the system were measured.
This study has found that the speed of air movement and high temperature of air ambient negatively influenced the performance of the cooling system. The optimum value of the performance of the compressive cooling system obtained at the external air temperature range of (18 → 28 C°). Additionally, the research suggested that the relative humidity of the atmosphere should exceed 50% for this case of study. Therefore, selecting a suitable place for the compressive cooling system is crucial to attain a better performance with less consumption of electricity.

تفاصيل المقالة

كيفية الاقتباس
Ali E. Hegaig, Haithem I. Elderrat, & Salem Fathi Elsheltat. (2024). Experimental Study on the Effect of Varying Operating Conditions on Performance of Compressive Cooling System. The International Journal of Engineering & Information Technology (IJEIT), 5(1). https://doi.org/10.36602/ijeit.v5i1.349
القسم
المقالات

المراجع

Ghida Ismail, Sinjar Tumt , Younis Ali,(2013), Rationalization of

Electric Power in air Conditioners, National Energy Research Center,

Iraq

https://www.energy.gov/energysaver/home cooling systems/air

conditioning, last accessed 13/12/2018

Noureddine Rifai, Fayad Mohamed Ab d, Mohamed Sulaiman

Mohamed, Improving the ability of concrete to heat insulation at high

temperatures with the addition of nanomaterials , Tikrit Journal of

Engineering Sciences ISSN: 1813162X 23127589, 2015 Volume: 22

Issue: 1 Pages: 76 93 Tikrit University

Ibrahim Jadoua Hamza, Improving thermal insulation of phenyl

resin by adding ceramic fillings, Journal of Babylon University/Pu re

and Applied Sciences/ No.(5)/ Vol.(20): 2012

Bermejo, P., Francisco Javier Pino, Felipe Rosa, "Solar absorption

cooling plant in Seville", Solar Energy, Vol(84),2010, 1503 1512. DOI: https://doi.org/10.1016/j.solener.2010.05.012

Abu Ein, S. Q., Sayel M. Fayyad, "Performance analysis of solar

pow ered absorption

Miguel P , Remi R .,"Exergy analysis of R413A as replacement of

R12 in a domestic refrigeration system ", Energy Conversion and

Management, 51, 2010

Kadhim Khlief, Studying the Process of Rising the Performance of

the Cooling System by Using the Two Liquids R 12 &R 134a

Electromechanical Engineering Department, University of Technology

/Baghdad

Imad Siddiq Mohamed,Salah Karim Jawad, Study of the effect of the

change of some factors affecting the thermal performance of

evaporative air cooler, The Iraqi Journal For Mechanical And Material

Engineering, Vol.9, No.2, 2009