Computational Fluid Dynamic Analysis of Reduction Gas Emissions Level inTurbine Combustor

Abstract

in this paper, (CFD) Computational Fluid Dynamics was used for a detailed burner design by the software Fluent (ANSYS). However, a number of numerical simulations were performed on a generic swirl burner and turbulence flow selection of a non-premixed which using syngas.
However, non-premixed flames which characterized by relatively high temperatures, high NOx concentrations, and emission indices. The results showed that the presence of methane in syngas increases the peak flame temperature and the thermal NOx, significantly.
Therefore, Investigation showed that effecting of H2, CO, and N2 contents in the fuel mixture level NOx emissions, thus the present compositions for pure methane are respectively influenced on syngas1 by (10% CH4, 45% H2, 45% CO) , syngas2 by (50% CH4, 10% H2, 40%N2) and syngas3 (60% CH4, 20% H2, 20%N2).