Stand-alone Photovoltaic System for a House in Misurata City
الشريط الجانبي للمقالة
محتوى المقالة الرئيسي
الملخص
Direct conversion of solar irradiance into electricity can be used as electrical power source for home to meet its daily energy requirement. This paper presents the complete design of a stand-alone Photovoltaic system (SAPV) to supply electric power for a traditional house in city of Misrata-Libya according to its energy requirements. This paper outlines in detail the procedure for specifying each component of the standalone photovoltaic power system. This system can be installed on the roof and the south side of the cabin. The results show that the sizing of PV stand-alone system depends on the load data, the solar resource data and the investment cost of system components. To power these appliances, 79 strings of one with average daily energy of 13.9 kWh. In addition, 52 batteries in the battery bank with system battery capacity of 1300 Ah and voltage 48V, and one charge controller are required. Simulation results and analyses are presented to validate the proposed system configuration.
تفاصيل المقالة
هذا العمل مرخص بموجب Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
المراجع
Hassan, A., Fahmy, F., and El-Sayed, M. Stand-alone photovoltaic system for an emergency health clinic. International Conference on Renewable Energies and Power Quality, Granada (Spain) , 2010. DOI: https://doi.org/10.24084/repqj08.729
[ https://en.wikipedia.org/wiki/Timeline_of_solar_cells2017
Guda, A and Aliyu U., Design of a standalone
photovoltaic system for a residence in Bauchi, International
Journal of Engineering and Technology, Volume 5 No.1,2015
Al
Shamani, A., Yusof, M., Design & Sizing of Stand alone Solar
Power Systems A h ouse Iraq. Recent Advances in Renewable Energy
Sources 145 150, 2015.
. Hantula, R., Voege, D., How do solar panels work? Chelsea
House Publishers, New York. September 1, ISBN 978 1 60413 472 8,
Parlak, K.S.,
Solar PV array reconfigura tion under partial
shading conditions for maximum power extraction using genetic
algorithm , Electr. Power Energy Syst. 63, 713 721, 2014. DOI: https://doi.org/10.1016/j.ijepes.2014.06.042
Dunlop, J.
Batteries and Charge Controller in Stand Alone
Photovoltic Systems Fundamentals and Applications. Flor ida Solar
Energy Center. University of Central Florida.
Saif Edden, J., Jallad, Design and Simulation of a Photovoltaic
System with Maximum Power Control to Supply a Load with
Alternating Current, MSc Thesis, An Najah National University,
Nablus, P alestine, 2012.